My time: hours, timesheets and leave
Clock on and off, see your hours, request leave, and approve your team’s timesheets.
My time is where each person clocks on and off, sees the hours they have worked, checks their leave and asks for time off. For owners and managers the same page turns into the approvals screen: who is on today, everyone’s timesheets, the pay periods waiting for sign-off, and the leave requests to decide.
Hours recorded here are what pay and leave are worked out from, so a clean timesheet at the end of each pay period saves everyone time.
- 1Start your shift
- 2The leave you have available
- 3Ask for time off
- 4Add a shift the clock missed
- 5Your printable timesheet
Clocking on and off#
How to clock on and off#
Open My time and click Clock on. You can also click Clock on at the top right of the diary.
- AClock on from the diary
Figure 20.2Close-upClocking on from the diary. While you are on the clock, the card shows how long you have worked this shift and this week. Click Start break when you stop for a break and End break when you come back — or set the break in minutes afterwards (15, 30, 45 or 60).
At the end of the day, click Clock off.
Your shifts#
Your shifts lists every shift in the current pay period, with the total so far. Click Show all shifts to see earlier ones.
Adding a shift the clock missed#
Under Your shifts, click + Add shift.
- 1The day it happened
- 2When you started and finished
- 3Why the clock missed it — always required
- 4Add the shift
Figure 20.3Adding a shift the clock did not record. The reason is required. Enter the Day, when you Started and Finished, and the Break.
Say what happened in the box underneath — for example phone was flat, forgot to clock on. A short note is required.
Click Add it.
To correct a shift that was recorded wrongly, click Edit on it, change the times, say Why it is changing, and click Save.
Your leave#
Leave balances#
The Leave balances card shows the annual leave and personal / carer’s leave you have available, in days, with the hours accrued and already taken. Click How your leave accrues to see how it was worked out — leave builds up as you work, rather than landing in one lump.
People employed as casuals or contractors see that no leave accrues for them, unless the practice has agreed otherwise.
Requesting leave#
On My time, under Leave requests, click Request leave.
- 1What kind of leave
- 2Untick for a few hours
- 3A reason, if you want to give one
- 4Send it for approval
Figure 20.4A leave request: the type, the dates and an optional reason. Choose the Type: Annual leave, Personal / sick leave, Public holiday, Conference or training, Unpaid leave, or Other.
Choose the dates From and To. For part of a day, untick All day and give the day and the hours.
Add a reason if you want to, then click Send request.
Your printable timesheet#
- 1Print it, or save it as a PDF
- 2Whether the period is approved
- 3Totals after breaks
The sheet carries the practice’s letterhead and shows:
- the Staff member, their Employment and ordinary hours a week
- the Status: Approved, Sent back for changes, or Not yet approved
- the totals worked, the number of shifts and days, and the breaks
- a row per shift: Date, Start, Finish, Break, Hours and Notes (a corrected shift shows its correction note)
- approved leave, the approval note, and signature boxes for the Staff member and Approved by.
Click Download or print to print it or save it as a PDF, and Back to return. Hours are shown after breaks, and a shift still running is shown but not counted.
Approving hours: the Staff view#
On My time, the Mine and Staff switch at the top right moves between your own time and your staff’s. The Staff view has four tabs:
- 1Switch between your own time and your staff’s
- 2Today, timesheets, pay periods and leave
- 3Anyone who forgot to clock off
- 4Open a person’s hours
| Tab | What it shows |
|---|---|
| Today | Who has worked today and who is on now: clock in, clock out, break, shift and daily total for each person. Use the arrows to look at another day. Needs attention picks out anyone who seems to have forgotten to clock off. Click a name to open their hours. |
| Timesheets | A grid of people by days for any dates you choose, with daily totals. Click a person to correct, add or remove their shifts with a Manager note, then Save changes. |
| Pay periods | Each person’s hours for a pay period, ready to approve. |
| Leave requests | The same leave list as in Settings — see Approving leave. |
How to approve a pay period#
Open My time, click Staff, then Pay periods.
Choose the Pay period. The figures above the table show the hours worked, the number of people and how many are awaiting sign-off.
- 1Choose the pay period
- 2Everyone’s hours as a spreadsheet file
- 3Sign off this person’s hours
- 4Return them with a note
- 5Print their timesheet
Figure 20.7A pay period ready for sign-off. Check each person’s shifts, worked hours and leave. Click their print button to see their timesheet in full.
Click Approve for each person whose hours are right.
- 3Sign off this person’s hours
- 4Return them with a note
- 5Print their timesheet
Figure 20.8Close-upOne person’s row: approve, send back or print. If something needs fixing, click Send back, say what needs fixing, and click Send back again.
When everyone is approved, click Export for payroll for a spreadsheet file of everyone in the period.
The pay cycle#
The link under the table — for example Paid fortnightly, counted from … — sets how the pay periods are cut. Click it, choose the Cadence (Weekly, Fortnightly or Monthly) and the date a period started from, then Save.
Approving leave#
When leave is waiting, Needs your attention on the Dashboard says how many requests there are to decide.
- ALeave waiting for you
How to approve or decline leave#
Click the Dashboard row, or open SettingsUsersTime and leave and click Leave requests.
- 1Record leave that was agreed in person
- 2Approve the request
- 3Approve even though it takes them below zero
- 4Decline, with a one-line reason
Figure 20.10Leave requests waiting for a decision, and the decisions already made. Under Waiting on you, each request shows the type, the dates, the reason, how many days it costs and the person’s balance.
Click Approve. If approving would take the person below zero, the button reads Approve anyway and the line says what their balance would become.
To refuse, click Decline and give a one-line reason. The reason is shown to the person.
Recording leave for someone#
For time off that was agreed without a request — a phone call from someone who is unwell, for example — click Add leave for someone. Choose who, the type and the dates, and save it. It is approved as you save it and blocks their diary straight away. Clinidiary tells you how many appointments are already booked in those days, so you can move them.
Time and leave settings#
- 1Whether staff clock on at all
- 2Who is on, leave, pay periods, timesheets, entitlements
Staff clock on and off puts a Clock on button in the diary, in the side rail and on My time. Untick it and those buttons go, and nothing new is recorded. Hours already worked are kept, and anybody part-way through a shift can still clock off.
| Tab | What it is for |
|---|---|
| On now | Who is clocked on right now, since when, and their breaks. A shift over twelve hours is flagged as a probably forgotten clock-off. |
| Leave requests | Approving and recording leave — see Approving leave. |
| Pay periods | The same sign-off screen as My time → Staff — see Approving hours. |
| Timesheets | Every shift between two dates, with each person’s total for the period. |
| Entitlements | How much leave a year is worth, and each person’s balances. |
Leave entitlements#
- 1A full-time year of annual leave
- 2A full-time year of personal leave
- 3Leave this off unless agreed
- 4Each person’s terms and balances
| Setting | What it does |
|---|---|
| Annual leave (weeks) | Annual leave in a full-time year. Starts at 4. |
| Personal leave (days) | Personal / carer’s leave in a full-time year. Starts at 10. |
| Casuals accrue leave too | Off unless the clinic has genuinely agreed to it — a casual is paid a loading precisely because they do not accrue leave. |
Change a figure and click Save entitlements.
Four weeks’ annual leave and ten days’ personal leave are the Australian minimum for full-time staff.
The Balances table lists each person, how they are Employed as (Full time, Part time, Casual or Contractor), where their hours come from (the time clock, their agreed hours, or not tracked), the hours counted, and their annual and personal balances. You can change the employment type and the hours source right in the table; the same settings are on each person’s staff profile.
Tips and good habits#
- Clock on when you arrive, not when you remember. A missed shift can be added, but it is marked as added afterwards.
- Use the break buttons, or set the break in minutes, so paid hours are right without anyone doing sums.
- Managers: look at Needs attention on the Today tab each evening to catch forgotten clock-offs while people still remember when they left.
- Approve pay periods promptly, then export. Approved hours are locked, so payroll works from figures that will not change.
- Request leave early. Approved leave blocks the diary, so patients are not booked in when you are away.
- Record sick leave on the day with Add leave for someone, so the diary is cleared and the balance is right.