ClinidiaryUser Manual Australia Help centre
Connected workflows · Chapter 28

Workflow: a GP referral and the letter back

A referral arrives, becomes a patient and an appointment, and the GP gets a report on your letterhead.

Front deskPractitioner· 12 min read

Many patients come to a clinic because a doctor sent them. This chapter follows one GP referral from the moment it arrives to the report that goes back to the GP on your letterhead — and to the line in the reports that shows which doctors send you patients. One Directory entry for the doctor carries it all the way, so the doctor’s details are typed once and never again.

Who does what: the GP sends the referral and receives your report. The front desk adds the doctor and the patient and books the first visit. The practitioner treats the patient and writes the letters back. The owner or manager sees each referral counted in the reports.

The GPFront deskPractitionerOwner or manager1Sends a referral2Finds or adds the GPin the Directory3New from referral:patient, paper, case4Checks Referred byand Usual doctor5Books the firstvisit6Assesses, signs thenote, records ameasure7Writes the initialreport on theletterhead8Finalises and emailsit9Receives the report10Progress anddischarge reports11Sees the referralcounted in reports
  1. The GP — Sends a referral
  2. Front desk — Finds or adds the GP in the Directory
  3. Front desk — New from referral: patient, paper, case
  4. Front desk — Checks Referred by and Usual doctor
  5. Front desk — Books the first visit
  6. Practitioner — Assesses, signs the note, records a measure
  7. Practitioner — Writes the initial report on the letterhead
  8. Practitioner — Finalises and emails it
  9. The GP — Receives the report
  10. Practitioner — Progress and discharge reports
  11. Owner or manager — Sees the referral counted in reports
Diagram 28.1A GP referral and the letter back — one Directory entry for the doctor carries the referral from the first phone call to the report
StageWhoWhere in Clinidiary
1. The referral arrivesFront deskDirectory
2. New from referralFront deskPatientsNew from referral
3. Referred by and Usual doctorFront deskRecord → Details
4. The first visitFront desk, then the practitionerDiary, record → Clinical notes
5. The letter backPractitionerCase → Letters
6. Keeping the GP informedPractitionerCase → Letters
7. The referral in the reportsOwner or managerReports, Directory

Stage 1: the referral arrives#

A referral reaches the clinic as a letter or a GP’s care plan — by fax, email or secure message, or in the patient’s hand. Before you add the patient, make sure the doctor is in your Directory, with an email address. That one entry is what every later letter and report will use.

  1. Open Directory and search for the doctor by name, practice or suburb.

  2. Found? Open their entry and check the email. If it is missing, the entry says so in amber: press Add beside it and type the address from the referral’s letterhead.

  3. Not found? Press Add to the Directory, choose Doctor or clinician, and fill in the name, Practice, Email and Provider number (copied from the referral). Press Save.

    124
    1. 1Practice: pick where they work, and its address and phone come with it
    2. 2Email: where letters and reports to them are emailed
    3. 4Provider number, as on their letter
    Figure 28.1A new doctor: their practice, the email letters go to, and their number.

→ Next: a Directory entry for the doctor, ready to be picked as the patient’s referrer.

In full: Adding a doctor, practice or other contact · A Directory entry

Stage 2: New from referral#

New from referral takes the whole referral in one save: the person, the referring doctor and their paper, how it is funded, the case and the plan. Nothing is saved until you press Save it all.

12345
  1. 1The person
  2. 2The referring doctor and their paperwork
  3. 3How it is funded
  4. 4The case (optional)
  5. 5One save for everything
Figure 28.2New client from a referral: one page, numbered sections, one save.
  1. Open Patients and press New from referral.

  2. Who they are — the patient’s name, date of birth, mobile, email and address. If someone with that name and birthday is already on file, press This is them instead.

  3. Who referred them — type the doctor’s name or practice and pick them from the list; the practice shows beside each name. If they are not there, press Not on the list? Add … to the directory, fill in at least the name and email, and press Save and use them.

    123
    1. 1The new doctor, added without leaving the page
    2. 2Their email, for letters back
    3. 3Adds them to the Directory and picks them
    Figure 28.3A doctor who is not in the Directory yet, added without leaving the page.
  4. Under the doctor, press + Add the care plan and attach the referral: a PDF, or photos of the pages.

  5. How it is funded — choose the Funding; for a GP care plan, add the Medicare number, IRN and Expiry.

  6. The case — name the problem, for example Right shoulder pain, and choose the Practitioner.

  7. The plan — for a referral that approves a number of visits, fill in Visits approved, Referral dated and Plan expires.

  8. Press Save it all.

→ Next: a patient record linked to the referring doctor, with the referral filed on the case.

In full: A new patient from a referral · Choosing or adding a referrer on the spot

Stage 3: Referred by and Usual doctor#

A patient’s record links to two doctors in the Directory. They are often the same GP, but not always.

CardWhat it is for
Referred byThe doctor who sent the patient. Reports to the referrer are addressed here, and the referrer reports count it.
Usual doctorThe patient’s own GP — the doctor a discharge letter goes to.
  1. Open the patient’s record and the Details tab.

  2. Check the Referred by card: it was filled in from stage 2.

    12
    1. 1Who referred the patient
    2. 2Change or remove the referrer
    Figure 28.4Referred by: the doctor’s details, laid out like a letterhead.
  3. On the Usual doctor card, press Add (or Change), pick the doctor from the Directory, and press Save. If the referring GP is their own GP, pick the same doctor.

    12
    1. 1The patient’s usual doctor, from the Directory
    2. 2Choose a different doctor
    Figure 28.5Close-upThe usual doctor, with their practice and numbers from the Directory.

→ Next: the letters in stages 5 and 6 can be addressed to the right doctor in one click.

In full: Usual doctor and Referred by · Usual doctor and Referred by on the record

Stage 4: the first visit#

The referred patient is booked, arrives and is treated like any new patient — see Workflow: a new patient for every step. Three things are particular to a referral.

  1. Book the first visit in the Diary with the right service — a care plan visit usually has its own service and price. Choose the practitioner named on the case.

  2. Read the referral before the visit. It is on the patient’s Documents tab, filed as a Referral on the case.

  3. Measure at the start. Record a first outcome measure on the case, so your reports to the GP can show change against it.

1
  1. 1Visit 6 of the 8 approved
Figure 28.6Close-upA care plan visit counter on the booking: visit 6 of the 8 approved.

Each booking under a plan shows how many of the approved visits it uses, turning amber on the last one — a reminder that the GP needs a report, and perhaps a new plan.

→ Next: a signed assessment note and a first measure on the case. Time to write back.

In full: Workflow: a new patient · Recording a measure in the clinic · Treatment journeys, goals and plans

Stage 5: the letter back#

The initial report tells the GP what you found and what you plan to do. It is written from a template, on your letterhead, and addressed to the referring doctor automatically.

  1. On the patient’s Clinical notes, open the case and press Letters, then Write a letter.

  2. Choose Initial report to the referring GP.

    Figure 28.7Write a letter: your practice’s templates, with the reports to the GP among them.
  3. Check To: it is filled in with the doctor from Referred by. Replace each [prompt in square brackets] with your findings, working diagnosis and plan.

  4. Press Preview and finalise. Read the letter exactly as it will go — a yellow line warns of any prompt still in square brackets — then press Finalise.

  5. The email window opens. To holds the doctor’s Directory email. If there is none, type it and leave Save it to their profile ticked.

  6. Under Start from, pick your covering note, check The email and The attached letter, and press Send it.

    To and saved to their profile." preserveAspectRatio="xMidYMid meet">1235
    1. 1To: the doctor’s email
    2. 2Keep the address for next time
    3. 3The covering note — or one of your email templates
    4. 5Sends it
    Figure 28.8Emailing a report to a GP. This doctor had no email on file, so it is typed in To and saved to their profile.
1234
  1. 1Final, with its fingerprint
  2. 2Print it or keep a PDF
  3. 3Email it as a PDF
  4. 4Mark it withdrawn
Figure 28.9A finalised report to a GP: print it, email it, or withdraw it if it went out wrong.

→ Next: the GP knows the plan. As care goes on, keep them informed.

In full: Writing a letter from a template · Preview and finalise · Emailing a letter · Your letterhead · Your signature

Stage 6: keeping the GP informed#

A referral is a conversation. The starter templates cover each stage of care, and each one is addressed to the referring doctor.

WhenTemplate
After the first assessmentInitial report to the referring GP
During care, when something has changedProgress report to the GP
At dischargeDischarge summary to the GP
When the patient needs a specialistReferral to a specialist

For a patient seen under a GP’s chronic disease management plan, the Australian starter set also has Care plan report to the GP (Medicare CDM).

2345
  1. 2The chart: every reading of this measure
  2. 3Change since the reading before
  3. 4Correct the date or score
  4. 5Take a reading out of the trend
Figure 28.10Close-upThe measure’s chart on the case: the numbers to quote in a progress report.

→ Next: each letter is on the record, and each referral is counted.

In full: Reports to referrers · Letters to finish · History and progress charts

Stage 7: the referral in the reports#

Because the referrer was picked from the Directory, the referral is counted without anyone keeping a tally. Owners and managers can see which doctors send the clinic patients.

  1. Open the doctor’s Directory entry. Patients referred lists every patient they have sent you.

    3
    1. 3Every patient this doctor has referred
    Figure 28.11A GP’s Directory entry: every patient this doctor has referred.
  2. Open ReportsAll reports and, under Patients, choose Referrers and sources. Pick the period.

    123
    1. 1Which GPs and specialists are sending patients
    2. 2Referrals in the chosen period
    3. 3One row per referrer
    Figure 28.12Referrers and sources: one row per referrer, for the period you choose.
  3. For what each referrer’s patients brought in, open Referral values.

In full: How the Directory connects · The report library · Where the numbers come from

Checklist#

☐StageCheck
☐Referral arrivesThe doctor is in the Directory, with an email and provider number
☐New from referralPatient added with New from referral; referrer picked from the list, not typed
☐New from referralThe referral paper attached; the case named after the problem
☐DoctorsReferred by and Usual doctor checked on the Details tab
☐First visitBooked with the right service for the plan; referral read; first measure recorded
☐Letter backInitial report to the referring GP finalised and emailed
☐Keeping informedProgress report when things change; discharge summary at the end
☐ReportsThe referral shows in Referrers and sources
Clinidiary User Manual · Australia edition · November 2026Screens shown use an invented demo clinic. No real patient appears in this manual.